Asante EtherPaC 2000+ Series Guia de Instalação descarregar pdf (Página 14)

Page 3-2

Installing Network Drivers

Installing Network Speciﬁc Drivers

Novell NetWare Client

To install a NetWare DOS ODI driver automatically, run the INSTODI auto-

installation program on the Driver Diskette. Performing this procedure

installs all necessary NetWare DOS ODI client software, modiﬁes the CON-

FIG.SYS ﬁle, and conﬁgures the adapter automatically.

1 Insert the EtherPaC 2000+ Driver Diskette into the computer’s

ﬂoppy drive A, then change to drive A.

2 Type the following at the DOS prompt: INSTODI

3 Press return.

The main display appears.

4 Press any key to continue.

5 Press 1 to select VLM or 2 to select NETX ODI Environment.

6 If you are using a non-Plug-and-Play system, you may be

prompted to activate the adapter. Press Y to activate the adapter.

The appropriate ﬁles will be copied to the default C:\NWNET

directory.

7 When the installation is complete, remove the Driver Diskette

and reboot the system.

8 Run STARTNET.BAT from the C:\NWNET directory to logon to a

NetWare server as a NetWare DOS ODI client.

Microsoft Windows 95

This section explains how to install the driver to use your adapter with Win-

dows 95. The instructions require that you have previously installed the Win-

dows 95 software on the computer without installing a network adapter or

driver.

EPaC 205-01A Book Page 2 Wednesday, October 15, 1997 3:40 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 25 26

Sem comentários

Asante EtherPaC 2000+ Series Guia de Instalação Página 14