Asante IC36240 Guia de Configuração

IntraCore® IC36240 Series Layer 2+ Gigabit Ethernet Switch Setup Guide

Chapter 2: Hardware Installation and Setup Use the following guidelines to easily install the switch, ensuring that it has the proper power supply an

2.1.2 Recommended Installation Tools You need the following additional tools and equipment to install the switch into an equipment rack: • Flat head

5. Place the switch in the equipment rack. 6. Secure the switch by securing its mounting brackets onto the equipment rack with the appropriate scre

To verify the primary power status, use the Switch# show system command. Under System Information, you see the power unit status. System Information

Important: The switch must be located within 100 meters of its attached 10BaseT or 100BaseTX devices. Use the following guidelines to determine the c

• 1000BaseLH GBIC: Cables with SC-type fiber connectors; 10µ single-mode fiber media up to 20 km (65,617') • 1000BaseLX Long Haul GBIC: Cables

Chapter 3: Initial Software Setup Configure the switch by connecting directly to it through a console (out-of-band management), running a terminal em

e. Press the Configuration button from the Connect To window. e f. Set the data rate to 9600 Baud. g. Set data format to 8 data bits, 1 stop bit a

3.3 Passwords and Privileges Commands The switch has not default password, which allows anyone on the network access to various privilege levels. To

3.3.3 Password To specify a password on a line, use the password command in line configuration mode. Use the no form of this command to remove the pa

IntraCore IC36240 Layer 2+ Gigabit Ethernet Switch Setup Guide Asante Technologies, Inc. 2223 Oakland Road San Jose, CA 95131 USA SALES 800-662-9

3.4 Login Security Two methods are available on the IntraCore IC36240 to configure an authentication query process for better login security: the use

5. Type ip address and the new address. The following screen appears: Switch> enable Switch# configure Switch(config)# ip address 192.168.123.254

Chapter 4: Understanding the Command Line Interface (CLI) The switch utilizes Command Line Interface (CLI) to provide access to several different com

To list the commands available in user top mode, enter a question mark (?). Use a space and a question mark (?) after entering a command to see all t

In general, the top (privileged) commands allow you to change terminal settings on a temporary basis, perform basic tests, and list system informatio

To exit global configuration command mode and return to privileged EXEC mode, use one of the following commands: Command Purpose exit end Ctrl-Z

4.3.1 Interface Configuration Mode Many features are enabled on a per-interface basis. Interface configuration commands modify the operation of an in

In the following example, the switch shows the multiple Spanning Trees (MST) command. Switch(config)# spanning-tree mst configuration Switch(config-m

To get help specific to a command mode, a command, a keyword, or an argument, perform one of the following commands: Command Purpose Help Obtain a b

Switch# configure ? configure Enter configuration mode Note that in the example below, if you enter the ip command followed by the Return Key or

Table of Contents Table of Contents...

4.6 Using CLI Command History The CLI user interface provides a history or record of commands that you have entered. This feature is particularly use

4.8.1 Moving Around on the Command Line Use the following keystrokes to move the cursor around on the command line in order to make corrections or ch

4.8.3 Editing Command Lines That Wrap The enhanced editing feature provides a wraparound for commands that extend beyond a single line on the screen.

When you have completed the entry, press Ctrl-A to check the complete syntax before pressing Enter to execute the command. The dollar sign ($) appear

4.8.7 Transposing Mistyped Characters If you have mistyped a command entry, you can transpose the mistyped characters by using the following command:

Appendix A: Basic Troubleshooting In the unlikely event that the switch does not operate properly, follow the troubleshooting tips below. If more hel

Appendix B: Specifications The sections below list the features and product specifications for the IntraCore IC36240 switch. Connectors: 24 RJ-45 au

Security User password, SNMP access filter, port security (MAC address filter with notification), 802.1x (port-based, L2/L4 ACL, RADIUS, TACACS+ Man

Appendix C: FCC Compliance and Warranty Statements C.1 FCC Compliance Statement This equipment has been tested and found to comply with the limits fo

C.3 IntraCare Warranty Statement Products: IntraCore IC36240 Duration: 3 years Advanced Warranty United States: Second Business Day Replacement:

3.2 Connecting to a PC ...

Appendix D: Online Warranty Registration Please register this product online at http://www.asante.com/support/supRegistration.asp or by filling out a

Index Cabling console ...16 Ethernet...

Features...6 editing...

4.8.5 Scrolling Down a Line or a Screen...

Chapter 1: Introduction The IntraCore IC36240 24-port Layer 2+ Managed Gigabit Switch is a high-performance network switch used to reduce network con

1.2 Package Contents The following items are included in the switch’s package: • Switch • AC power cord • USB cable for management console port •

1.3.1 LEDs The IC36240 front panel LED display allows you to monitor the status of the switch. The IC36240 has one power LED indicator, one (optiona

1.4 Management and Configuration The switch is managed using Command Line Interface (CLI) in order to access several different command modes. Enterin